Workplace Health and Safety Queensland (WHSQ) recently issued a safety alert to warn owners and operators of inflatable water balls about the risks of using or placing electrical equipment near a pool or body of water where these water balls are used.
The large spheres are also known as ‘water walkers’, ‘hamster balls’ and ‘zorb water walking balls’.
In July 2017, while conducting audits at an agricultural show in North Queensland, a WHSQ Inspector witnessed a young child use an electric leaf blower to ‘shoot’ three other children.
All four youngsters were standing in a shallow inflatable pool. The electric leaf blower was in close proximity to the pool ahead of being used to inflate the ‘water balls’.
Additionally, the electric leaf blower was connected to a power supply and turned on. The inspector was able to convince the children to put the leaf blower down and move away from the area.
The safety alert recommended a number of control measures, and said to never:
Allow people to operate electrical equipment in situations where the equipment can fall into the water and potentially electrocute anyone in or on the water
Leave electrical equipment where it could be picked up by members of the public (including children) and used in a unsafe way.
If electrical equipment is used near water, adequate control measures must be in place to prevent the risk of electrical shock or electrocution to workers, patrons and members of the public.
Such measures include:
Only use electrical equipment designed to operate in or around water and is connected to an electrical circuit containing a safety switch or residual current device (RCD), or fitted with a portable RCD. Portable RCD’s should be tested daily or before each use (whichever is longer) using the inbuilt test button and inspected every three months by a competent person.
Selection of electrical equipment used for inflatable water balls should comply with the selection of appropriate equipment requirements in AS/NZS3000: Wiring Rules, particularly in relation to the weatherproof rating (International Protection <IP> code).
If possible, use non-mains powered equipment to inflate the water balls. For example, rechargeable battery powered blowers or low pressure air supply connected via a hose.
Electrical equipment not designed to operate in or around water must be located where it cannot come into contact with, fall or slide into water (this includes inflatable pools, areas where water can accumulate and splashing water).
Keep electrical cords and their connections off the ground to prevent them from:
coming into contact with water
becoming damaged by workers or patrons accessing the area
becoming a trip hazard.
Only use electrical equipment in accordance with the manufacturer’s instructions.